HUSKIE 12 Ton Remote Compression C-Head With Rubber Boot
$ 1,020.00
Limited Stock
The EP-410H is a traditional C-head with a one-inch jaw opening. It will accept all “U” type dies currently used in 12 ton tools on today’s market. A 10,000 psi external pump is required to operate the C-head. The output pressure is 12 Ton when the pump is set at 10,000 psi.
- Protective Rubber Boot on “C” Head
- 1” Jaw Opening
NOTE: When using any of these high-pressure tools, always use 10,000 psi rated non-conductive hose (NC-16 series).
Contact us if you have any questions.
Product Description
HUSKIE 12 Ton Remote Compression C-Head With Rubber Boot
The output pressure is 12 Ton when the pump is set at 10,000 psi. After compression is made on a lug or sleeve, an internal ram spring retracts the jaw when the pump pressure is relieved. The tool is supplied with a standard 3/8″ male, screw-type coupler but can be fitted with an opposite female coupler if requested. Carrying case included.
- Protective Rubber Boot on “C” Head
- 1” Jaw Opening
Product Specifications
| Weight | 10 lbs |
|---|---|
| Shipping Dimensions | 14 × 12 × 6 in |
| Brand | Huskie Tools |
| Specifications | Lugs #8 AWG – 750 MCM CU |
| Product Length | 10" |
| Product Weight | 8.2lbs |
Product Reviews
You must be logged in to post a review.
Get a FREE Tallman T-shirt
We really want your feedback on the products we sell at Tallman Equipment. If you’ve used any of the products we sell (whether you bought them from us or not), leave a review on our website. After writing just 3 reviews, you can receive a free Tallman t-shirt.
Questions? Contact Us.
As always, if you have any questions about this tool, or stock quantities contact us by phone at: 877-860-5666
or by email: sales@tallmanequipment.com
Or fill out this form
There are no reviews yet.