HUSKIE 12 Ton Remote Compression C-Head With Rubber Boot
$1,020.00
Available on backorder
The EP-410H is a traditional C-head with a one-inch jaw opening. It will accept all “U” type dies currently used in 12 ton tools on today’s market. A 10,000 psi external pump is required to operate the C-head. The output pressure is 12 Ton when the pump is set at 10,000 psi.
- Protective Rubber Boot on “C” Head
- 1” Jaw Opening
NOTE: When using any of these high-pressure tools, always use 10,000 psi rated non-conductive hose (NC-16 series).
Contact us if you have any questions.
You must be logged in to post a review.
We really want your feedback on the products we sell at Tallman Equipment. If you’ve used any of the products we sell (whether you bought them from us or not), leave a review on our website. After writing just 3 reviews, you can receive a free Tallman t-shirt.
Product Specifications
| Weight | 10 lbs |
|---|---|
| Shipping Dimensions | 14 × 12 × 6 in |
| Brand | Huskie Tools |
| Specifications | Lugs #8 AWG – 750 MCM CU |
| Product Length | 10" |
| Product Weight | 8.2lbs |
More Product Information
HUSKIE 12 Ton Remote Compression C-Head With Rubber Boot
The output pressure is 12 Ton when the pump is set at 10,000 psi. After compression is made on a lug or sleeve, an internal ram spring retracts the jaw when the pump pressure is relieved. The tool is supplied with a standard 3/8″ male, screw-type coupler but can be fitted with an opposite female coupler if requested. Carrying case included.
- Protective Rubber Boot on “C” Head
- 1” Jaw Opening
Questions? Contact Us.
As always, if you have any qustions about this tool, or stock quantities contact us by phone at: 877-860-5666
or by email: sales@tallmanequipment.com
Or fill out this form:
Reviews