Speed Systems CT Chamfering Tools
The CT-1 Chamfering Tool cut a 45 degree bevel on the insulation of cables with an O.D. of 1/2″ to 1-3/8″. The CT-2 Tool cuts a 45-degree bevel on the insulation of cables with an O.D. of 1-1/4″ to 2-3/4″.
- Chamfers cable end at 45 degrees
- Prepares edge of cable insulation for pre-molded termination
- Adjustable – no adapters or bushings required
Product Description
Speed Systems CT Chamfering Tools
CT-1: Cable O.D. 1/2″ – 1-3/8″
CT-2: Cable O.D. 1-1/4″ – 2-3/4″ (24.1 – 69.9 mm)
- Chamfers cable end at 45 degrees
- CT-1: For use on .175″ to .345″ insulation (15kV thru 35kV)
- CT-2: For use on .175″ to .345″ insulation (15kV thru 35kV)
- Prepares edge of cable insulation for pre-molded termination
- Adjustable – no adapters or bushings required
Product Specifications
| Weight | 1 lbs |
|---|---|
| Shipping Dimensions | 6 × 4 × 2 in |
| Brand | Speed Systems |
| Option | CT-1 (1/2"-1-3/8" OD), CT-2 (1-1/4" – 2-3/4" OD), Replacement Blade |
| Made in USA | Made in USA |
Product Reviews
You must be logged in to post a review.
Get a FREE Tallman T-shirt
We really want your feedback on the products we sell at Tallman Equipment. If you’ve used any of the products we sell (whether you bought them from us or not), leave a review on our website. After writing just 3 reviews, you can receive a free Tallman t-shirt.
Questions? Contact Us.
As always, if you have any questions about this tool, or stock quantities contact us by phone at: 877-860-5666
or by email: sales@tallmanequipment.com
Or fill out this form
There are no reviews yet.