STANLEY Hydraulic Flow & Pressure Gauge
$795.27
Available on backorder
The Stanley Hydraulic Flow & Pressure Gauge is used to test the hydraulic circuitry by measuring the back pressure, resistance and flow. Includes couplers.
Contact us if you have any questions.
You must be logged in to post a review.
We really want your feedback on the products we sell at Tallman Equipment. If you’ve used any of the products we sell (whether you bought them from us or not), leave a review on our website. After writing just 3 reviews, you can receive a free Tallman t-shirt.
Additional information
Brand | Stanley |
---|
Product Specifications
Product description
STANLEY Hydraulic Flow & Pressure Gauge
- Maintain optimal tool performance by safely measuring your hydraulic pressure & flow from your power source
- Tester Range:
- 0-3,000 psi
- 0-15 gpm
When put into the hydraulic circuit in place of the tool, this tester will determine the following items:
1. Flow Rate – Reads in GPM (Gallons per Minute) and LPM (Liters per Minute).
2. Back Pressure – When the hydraulic oil is at operating temperature, back pressure should not exceed 150 PSI for best tool performance and seal life. Maximum back pressure reading should not exceed 250 PSI. This pressure is read on the “Return Pressure Gauge / 0-600 PSI.”
3. Relief Pressure Setting – With the circuit at the recommended flow rate, the restrictor valve can be turned clockwise to add pressure to the 3000 PSI gauge. Pressure should rise to 2100-2200 PSI without decreasing the flow reading by more than 10%. Low relief settings reduce tool performance and add heat to the hydraulic circuit.
In addition to checking flow rate, back pressure, and relief settings, the flow and pressure tester can help detect pump/valve wear and flow restrictions within the hydraulic circuit.
Questions? Contact Us.
As always, if you have any questions about this tool, or stock quantities contact us by phone at: 877-860-5666
or by email: sales@tallmanequipment.com
Or fill out this form
Reviews