HASTINGS DEAD END ARM
The Hastings Temporary Dead-End Arm enables a line crew to spread conductors off an existing dead-end arm to gain working clearance to replace and terminate new conductors.
Contact us if you have any questions.
You must be logged in to post a review.
We really want your feedback on the products we sell at Tallman Equipment. If you’ve used any of the products we sell (whether you bought them from us or not), leave a review on our website. After writing just 3 reviews, you can receive a free Tallman t-shirt.
Product Specifications
Weight | 38.5 lbs |
---|---|
Shipping Dimensions | 77 × 12 × 12 in |
Dimensions | Height: 4 5/8", 4 7/8", 5 7/8", 6 1/8" |
Brand | Hastings |
More Product Information
HASTINGS DEAD END ARM
Features:
- Arms are constructed with a 3″ diameter fiberglass and foam core to meet most load requirements for temporary dead ends.
- Load limit – 500 lbs. per position or 1,000 lbs. total load limit.
- Arms have two holes with 18″ spacing to accommodate 5/8″ diameter hardware bolts for dead ends. Two aluminum sleeves are installed to prevent wear and tear on the fiberglass arm.
- Steel mounting brackets have multiple holes for adjustment to fit various arm sizes.
- Arms can be installed on either the top or bottom of existing cross arms.
Contact
As always, if you have any qustions about this tool, or stock quantities contact us by phone at: 877-860-5666
ot by email: sales@tallmanequipment.com
Or fill out this form:
Reviews