GREENLEE DM-510A True RMS Digital Multimeter
$175.35
Available on backorder
The Greenlee DM-510A Digital Multimeter is a hand-held testing device with the following measurement capabilities: AC and DC voltage, AC and DC current, frequency, and resistance. It also checks diodes and verifies continuity. An optional optically isolated computer interface with software facilitates the recording of readings from the multimeter to a computer.
Contact us if you have any questions.
100% Secure Payments
You must be logged in to post a review.
We really want your feedback on the products we sell at Tallman Equipment. If you’ve used any of the products we sell (whether you bought them from us or not), leave a review on our website. After writing just 3 reviews, you can receive a free Tallman t-shirt.
Product Specifications
| Weight | .9 lbs |
|---|---|
| Shipping Dimensions | 10 × 10 × 12 in |
| Amperage Measurement | 600, 6000μA; 60, 600mA; 6, 8A |
| Battery | (2) 1.5 V AAA |
| Capacitance | 60, 600 nF; 6, 60, 600, 3000μF |
| Display | Backlit LCD With 6,000 Count |
| Frequency Measurement | 10Hz – 50kHz Sine Wave, 5Hz – 999.9kHz Logic Level Square Wave |
| Includes | (2) 1.5V AAA Batteries, Bead Temperature Probe (DM-210A, DM-510A Only, 400°F/204°C max), Test leads, ProtectiveBoot |
| Measurement Category | CAT IV 300 V, CAT III 600 V, CAT II 1000 V |
| Replacement Part | TSG-3 Sure-Grip Test Leads |
| Resistance Measurement | 600Ω; 6, 60, 600 kΩ; 6, 60 MΩ |
| Standard | CAT IV, CAT II, C/UL US Listed, CAT III, CE Listed |
| Temperature Rating | K Type, -58 To 1832°F (-50 To 1000°C) |
| Type | Professional Plant Digital |
| Voltage Measurement | 60, 600 mV, 6, 60, 600, 1000V |
| Brand | Greenlee |
More Product Information
GREENLEE DM-510A True RMS Digital Multimeter
- Measures voltage, current, resistance, and frequency
- Tests continuity and diodes
- Backlit LCD with 6,000 count display
- Two voltage detection modes – non-contact or using a single test lead
- BeepJack warns when test leads are incorrectly inserted in current measurement terminals
- Automatic and manual range selection
- Relative offset mode to see changes in measurements
- Data hold
- Use optional USB / RS-232 interface DMSC-2U for direct-to-PC logging
- Lifetime Limited Warranty
- Accessories included: (2)1.5V AAA batteries, bead temperature probe (DM-210A, DM-510A only, 400°F/204°C max), test leads, protective boot
- True RMS for no-compromise accuracy
- Crest capture (peak hold) plus recording of max, min, max-min, and average
- Low impedance AutoCheck mode – automatically selects AC or DC volts, resistance, or continuity, Low impedance masks ghost voltage pickup
- Measures capacitance
- Measures temperature using a type K thermocouple
Questions? Contact Us.
As always, if you have any qustions about this tool, or stock quantities contact us by phone at: 877-860-5666
or by email: sales@tallmanequipment.com
Or fill out this form:
Reviews