MILWAUKEE M18 FUEL™ 1/2 ” Mid-Torque Impact Wrench w/ Pin Detent Kit
Available on backorder
The M18 FUEL™ 1/2″ Mid-Torque Impact Wrench w/ Pin Detent Kit delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 650 ft-lbs of nut-busting torque and only weighs 5.1 lbs, making it extremely versatile, capable of performing a wide variety of applications.
- Best power to weight ratio is offered as the tool provides 650 ft-lbs. of nut-busting torque at only 5.1 lbs. with a 5.0Ah battery.
- 6.0″ in length provides most access in tight spaces
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
You must be logged in to post a review.
We really want your feedback on the products we sell at Tallman Equipment. If you’ve used any of the products we sell (whether you bought them from us or not), leave a review on our website. After writing just 3 reviews, you can receive a free Tallman t-shirt.
More Product Information
MILWAUKEE M18 FUEL™ 1/2 ” Mid-Torque Impact Wrench w/ Pin Detent Kit
The POWERSTATE™ Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. The 1/2″ Impact Wrench is the most compact in its class, giving our users access to stubborn fasteners in spaces where larger impact wrenches can’t fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers our users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence ensures maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18 REDLITHIUM™ XC5.0 Extended Capacity Resistant Battery Packs included provide increased protection against oils, greases, and solvents.
- Best power to weight ratio is offered as the tool provides 650 ft-lbs. of nut-busting torque at only 5.1 lbs. with a 5.0Ah battery.
- 6.0″ in length provides most access in tight spaces
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode
- Auto shut-off mode prevents over tightening and increases productivity by applying no more than 35 ft-lbs. of torque.
- Bolt-removal mode offers more control after bolt breakaway as RPMs drastically slow down once the bolt is loosened.
- Mode 1 RPMs: 0-1,250; Mode 2 RPMs: 0-1,950; Mode 3 RPMs: 0-2,575; Mode 4 RPMs: 0-2,575
- Mode 1 IPMs: 0-900; Mode 2 IPMs: 0-2,100; Mode 3 IPMs: 0-3,100; Mode 4 IPMs: 0-3,100
- REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
- Works in up to to 69kV environments
- Compatible with all M18™ batteries & Chargers
- The POWERSTATE™ brushless motor delivers up to 550 ft-lbs. of max fastening torque
INCLUDES
(2) M18™ REDLITHIUM™ XC5.0 Resistant Battery(48-11-1850R)
(1) M18™ & M12™ Multi-Voltage Charger(48-59-1812)
(1) Blow Molded Case
Product Specifications
Weight | 8 lbs |
---|---|
Shipping Dimensions | 14 × 12 × 6 in |
Brand | Milwaukee |
Anvil Type | Detent Pin |
Milwaukee Battery Type | M18 |
IPM | 0-3,500 |
Maximum Torque | 650 ft-lbs |
Fastening Torque | 650 ft-lbs |
Nut-Busting Torque | 550 ft-lbs |
Dimensions | 6" x 10.12" x 2.74" |
Drive Control | 4-Mode w/ Bolt Removal Mode |
Maximum RPM | 2575 rpm |
Contact
As always, if you have any questions about this tool, or stock quantities contact us by phone at: 877-860-5666
ot by email: sales@tallmanequipment.com
Or fill out this form
Reviews