MILWAUKEE M18 FUEL 1/2″ Compact Impact Wrench w/ Pin Detent Kit
Available on backorder
The M18 FUEL™ 1/2″ Compact Impact Wrench w/ Pin Detent Kit is the most compact in its class, delivering users more power, the most access in tight spaces at only 4.9″ in length, and maximum workspace visibility. The cordless impact wrench features a POWERSTATE™ Brushless motor that generates up to 250 ft-lbs of fastening and nut-busting torque, providing users with the power required for installation and removal, even in confined spaces.
- Tool features pin detent for locking sockets in place securely, especially while working overhead
- 4.9″ in length provides most access in tight spaces
- The POWERSTATE™ brushless motor delivers up to 250 ft-lbs. of nut-busting torque
You must be logged in to post a review.
We really want your feedback on the products we sell at Tallman Equipment. If you’ve used any of the products we sell (whether you bought them from us or not), leave a review on our website. After writing just 3 reviews, you can receive a free Tallman t-shirt.
More Product Information
MILWAUKEE M18 FUEL 1/2″ Compact Impact Wrench w/ Pin Detent Kit
The 1/2″ impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. Our REDLINK PLUS™ Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18 REDLITHIUM™ XC5.0 Extended Capacity Resistant Battery Packs included provide increased protection against oils, greases, and solvents.
- 4.9″ in length provides most access in tight spaces
- The POWERSTATE™ brushless motor delivers up to 250 ft-lbs. of nut-busting torque
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode
- AUTO SHUT-OFF™ control prevents over tightening and increases productivity by applying no more than 20 ft-lbs. of torque
- Bolt-removal mode offers more control after bolt breakaway as RPMs drastically slow down once the bolt is loosened
- Mode 1 RPMs: 0-900; Mode 2 RPMs: 0-1,650; Mode 3 RPMs: 0-2,400; Mode 4 RPMs: 0-2,400
- Mode 1 IPMs: 0-1,000; Mode 2 IPMs: 0-2,400; Mode 3 IPMs: 0-3,500; Mode 4 IPMs: 0-3,500
- REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
- Works in up to to 69kV environments
- Compatible with all M18™ batteries & Chargers
- Tool features pin detent for locking sockets in place securely, especially while working overhead
INCLUDES
(2) M18™ REDLITHIUM™ XC5.0 Resistant Battery(48-11-1850R)
(1) M18™ & M12™ Multi-Voltage Charger(48-59-1812)
(1) Blow Molded Case
Product Specifications
| Weight | 10 lbs |
|---|---|
| Shipping Dimensions | 16 × 14 × 4 in |
| Product Dimensions | 7.95" X 3.9" X 2.56" |
| Wrench Weight | 2.4 lbs |
| Nut Busting Torque | 250 ft-lbs |
| Fastening Torque | 250 ft-lbs |
| Anvil Type | 1/2" Square w/ Pin Detent |
| Battery System | M18 |
| Brand | Milwaukee |
| Milwaukee Battery Type | M18 |
Contact
As always, if you have any questions about this tool, or stock quantities contact us by phone at: 877-860-5666
ot by email: sales@tallmanequipment.com
Or fill out this form
Join The 1952 Society
Want to keep up with everything going on at Tallman, special offers and more? Sign up below
Reviews