CHANCE Insulated Hydraulic Conductor Cutters for up to 954 MCM ACSR
$3,059.72 – $3,062.65
Available on backorder
The hydraulic conductor cutter is used to cut conductors up to 954 MCM ACSR, All-Aluminum, and 500 MCM copper. Operation is similar to that of a hydraulic jack- a knob-handle is turned to enable the lineman to operate the pump handle. When the cut is completed, the knob is turned in the opposite direction to allow the cutting head to open.
- Operates like a hydraulic jack- a knob-handle is turned to enable the lineman to operate the pump handle
- Knob is turned in the opposite direction to allow the cutting head to open
- Epoxiglas pole, handle, and hydraulic hose are tested to 100 kV per foot
- Hydraulic oil has a dielectric strength of 25 + kV per ASTM D877-64
You must be logged in to post a review.
We really want your feedback on the products we sell at Tallman Equipment. If you’ve used any of the products we sell (whether you bought them from us or not), leave a review on our website. After writing just 3 reviews, you can receive a free Tallman t-shirt.
Product Specifications
Weight | 20 lbs |
---|---|
Shipping Dimensions | 96 × 6 × 3 in |
Brand | ABChance |
Length | 6', 8' |
More Product Information
CHANCE Insulated Hydraulic Conductor Cutters for up to 954 MCM ACSR
The Epoxiglas pole, handle and hydraulic hose have been tested to 100 kV per foot. Hydraulic oil has a dielectric strength of 25 + kV per ASTM D877-64. The hose has a minimum burst strength of 12,000 PSI. The pump provides a maximum pressure of 9,000 PSI. Features include jaws designed to cut without flattening the conductor. The jaws are also adjustable to compensate for wear. The hydraulic hose is located outside the pole for easy maintenance. It is extremely well balanced, requiring minimum effort to cut large conductors.
- Operates like a hydraulic jack- a knob-handle is turned to enable the lineman to operate the pump handle
- Knob is turned in the opposite direction to allow the cutting head to open
- Epoxiglas pole, handle, and hydraulic hose are tested to 100 kV per foot
- Hydraulic oil has a dielectric strength of 25 + kV per ASTM D877-64
- Hose minimum burst strength is 12,000 PSI
- Pump provides maximum pressure of 9,000 PSI
- Cuts without flattening conductor
- Jaws are adjustable to compensate for wear
- Hydraulic hose is located outside the pole for easy maintenance
Questions? Contact Us.
As always, if you have any qustions about this tool, or stock quantities contact us by phone at: 877-860-5666
or by email: sales@tallmanequipment.com
Or fill out this form:
Reviews